Standard manuscript format is 12-point Times New Roman, double-spaced, with 1-inch margins, left-aligned text with a ragged right edge, and a half-inch first-line indent set in your paragraph settings. That’s the plain, readable layout agents and editors expect when your file opens.

Formatting won’t sell a bad book. Bad formatting, though, makes an editor or agent start reading with a frown, and some of it actively breaks the editing process. A clean cutting board doesn’t improve the cut of meat, but nobody wants to start work on a dirty one. Below: the exact settings, the steps in Word and Google Docs, and the mistakes our editors see most.

What is standard manuscript format?

It’s a set of conventions, not a law, and it exists so the person reading your pages has room to work. Double spacing and wide margins give an editor space to mark things up. Yes, Times New Roman is boring. That’s the point.

Setting Standard
Font 12-point Times New Roman (Courier is the traditional alternative)
Line spacing Double
Margins 1 inch on all sides
Alignment Left-aligned, ragged right edge (not justified)
Paragraph indent 0.5-inch first-line indent, set in paragraph settings
Space between paragraphs None
Spaces after a period One
Emphasis Real italics
File type .docx, unless the recipient asks for something else

Two rows cause most of the grief. The indent comes from paragraph settings, never the Tab key or the space bar. And “no space between paragraphs” means no blank line, which Word’s default template tries to add anyway. The steps below fix both.

One rule beats everything else on this page: if an agent’s or publisher’s submission guidelines ask for something different, do what they ask. William Shunn’s Proper Manuscript Format page is a widely used reference for how the pages should look.

How do I format the first page of a manuscript?

The first page is the only page that looks different, so it gets its own rules. Top left: your legal name and contact details. Top right: the approximate word count, rounded, so 83,412 words becomes “about 83,000 words.” Partway down the page, centered: the title, then “by” and your byline on the next line. If you publish under a pen name, the pen name goes in the byline and your legal name stays in the top-left corner.

No decorative title font, no clip art, no color. Formatting won’t save a weak opening, either. We cover what actually hurts a first page in our post on first page mistakes.

What goes in the header and page numbers?

Page 2 onward carries a running header: your surname, a short version of the title, and the page number, separated by slashes and aligned right. It looks like this: Surname / TITLE / 14. Use one keyword from the title, not all of it. Page 1 is counted but shows no header at all. The page number must be the automatic kind, a field your word processor updates itself. A number typed by hand is wrong the moment someone cuts a paragraph.

How do I format chapters and scene breaks?

Each chapter starts on a new page, with the chapter title about a third of the way down. Get the new page with a real page break: Ctrl+Enter on Windows, Cmd+Enter on a Mac. Get the drop with Spacing Before in the paragraph settings of the chapter title, not by pressing Enter a dozen times.

Hit Enter until you reach the next page and it looks perfect today. Then an editor cuts a paragraph in chapter two, and every chapter break you lined up by hand creeps out of place. A real page break stays put.

Scene breaks get a centered # on its own line. Some people use *** instead. Pick one and use it all the way through. Don’t use a blank line alone: a blank line disappears when it lands at the top or bottom of a page, and the reader has no idea the scene changed. Set that line’s first-line indent to none so the # sits dead center.

How do I format a manuscript in Word?

Do this before you write or paste anything. The steps are for Word on Windows. Word on a Mac has the same settings under slightly different menus.

  1. Margins. Layout > Margins > Normal gives you 1 inch on all four sides.
  2. Set the Normal style once. On the Home tab, right-click Normal in the Styles gallery and choose Modify. Pick Times New Roman, 12, left-aligned. Then Format > Paragraph: Line spacing Double, Spacing Before and After 0 pt, and under Indentation, Special: First line, By: 0.5″. Every paragraph now follows the rules.
  3. Clean the leftovers. Pasting chapters in from other files? Choose Keep Text Only so the old formatting stays behind. Then press Ctrl+H. Search for ^t (a tab) and replace with nothing. Search for two spaces, replace with one, and repeat until Replace All finds none. Search for ^p^p and replace with ^p to remove blank lines between paragraphs.
  4. Header and page numbers. Double-click the top margin of page 1 to open the header, and tick Different First Page on the Header & Footer tab. Move to the header on page 2, choose Page Number > Top of Page > Plain Number 3, click in front of the number, and type your surname, a slash, the title keyword and another slash.
  5. Chapter titles. Apply Heading 1 to each chapter title, then modify it like Normal: black, Times New Roman, 12 point, centered, no first-line indent, Spacing Before around 180 pt (2.5 inches) for the drop. Adjust by eye in Print Layout until the title sits about a third of the way down. Add the break with Ctrl+Enter, or tick “Page break before” under Line and Page Breaks. View > Navigation Pane then lists your chapters.
  6. Page 1, scene breaks, italics, saving. Set first-line indent to none for the contact block, word count and title block on page 1, and for each centered # scene break. Ctrl+I for italics. Then File > Save As > Word Document (.docx).

How do I format a manuscript in Google Docs?

Same settings, different menus.

  1. Margins. File > Page setup. Set Top, Bottom, Left and Right to 1″.
  2. Font and alignment. Select everything (Ctrl+A or Cmd+A). Choose Times New Roman and size 12 in the toolbar, then left-align with Ctrl+Shift+L (Cmd+Shift+L on a Mac).
  3. Spacing. Format > Line & paragraph spacing > Double. Open it again, choose Custom spacing, and check that Before and After both read 0.
  4. Indent. Format > Align & indent > Indentation options. Under Special indent, pick First line and type 0.5″.
  5. Make it stick. Format > Paragraph styles > Normal text > Update ‘Normal text’ to match.
  6. Header and page numbers. Insert > Page numbers, and pick the top-right option that skips the first page. Click into the header on page 2, put your cursor before the number, and type your surname, a slash, the title keyword and another slash.
  7. Chapters. Put a page break before each chapter (Insert > Break > Page break, or Ctrl+Enter / Cmd+Enter). Format Heading 1 plain: Times New Roman, 12, black, centered, no indent, with Spacing Before in Custom spacing for the drop. Then Format > Paragraph styles > Heading 1 > Update ‘Heading 1’ to match. View > Show outline gives you a chapter list.
  8. Page 1, scene breaks, italics, saving. No first-line indent on the contact block, title block or centered # lines. Ctrl+I (Cmd+I) for italics. Then File > Download > Microsoft Word (.docx).

What formatting mistakes do editors see most?

Three do real damage, because they change how the file behaves once editing starts.

Tabs or spaces for indents. A tab is a character sitting in your text. A real indent is formatting. Change the layout and a real indent follows along, while every hand-made one stays where you left it, doubles up, or has to be hunted down and stripped out. It’s a pain in the ass for whoever inherits the file.

Enter-key page breaks. A stack of empty paragraphs standing in for a page break. It holds until the first edit.

Typed-in numbers. Page numbers typed into a header, or line numbers typed into the body, become ordinary text, and the line numbers end up mid-paragraph the minute anything moves. If someone asks for line numbers, Word can add them without making them part of your text (Layout > Line Numbers).

The rest won’t break anything. They just make the first impression worse:

  • Justified text. Ragged right is the standard.
  • Blank lines between paragraphs.
  • Two spaces after periods, a typewriter habit. One space.
  • Fancy fonts, oversized type, colored text.
  • Underlining where italics belong. Some guides still accept it as a typewriter stand-in, but your software does real italics, so use them.
  • Each chapter saved as its own file. Send one file for the whole book.
  • A header on page 1, or no word count and contact details on it.

Formatted? Now get the words checked

Upload a sample and a human editor will edit it free, and tell you whether your manuscript needs copyediting or proofreading.

Get a Free Sample Edit

Should I format differently for an editor than for an agent?

The look is the same. What changes is what you send and how you send it.

For an editor (ours included), send one clean .docx with these settings and the whole book in a single file. Track changes need a file that behaves: real formatting, so edits don’t scramble the layout, and one document, so the editor can search, check consistency and see the whole book in one place.

For an agent, the submission guidelines come first. If they ask for a query plus a sample, send exactly that, in whatever format they name. Some want pages pasted into an email, some want an attachment. Use standard manuscript format wherever they’re silent. An agent may see only your opening pages, so those pages carry everything. If you’re not sure yours are ready, our First Chapter Critique is an in-depth developmental read of your first 5,000 words, with a 100% refund if you’re not satisfied.

Your word count goes on page 1 either way. In Word it sits in the status bar at the bottom left. In Google Docs, use Tools > Word count (Ctrl+Shift+C, or Cmd+Shift+C on a Mac). Agents care about that number, and what counts as reasonable depends on your genre, so check what’s typical for yours before you send. If you’re over, here’s how to decrease your manuscript’s word count.

Is manuscript format the same as formatting a book for print or ebook?

No. Manuscript format is how you present a draft to the people who will read and edit it. Interior formatting for print or ebook is a separate job that comes after editing, once the text is final. An editor wants the plain, double-spaced draft with room to mark up, not something dressed up like a finished book. Fix the words first, and our editing a novel checklist walks through the stages.

Next step

Once your manuscript is formatted, put it in front of a human. Upload a sample for our free sample edit and one of our editors will edit it for free, then tell you whether the manuscript needs copyediting or proofreading. Every editor here is a real person with a red pen, and our book editing services pick up from there.